Difference between revisions of "Bit Protector"

From Beywiki, the Beyblade Encyclopedia - Presented by the World Beyblade Organization
Jump to: navigation, search
(→‎Differences Between Molds)
Line 6: Line 6:
 
For more information on the components and assembly of HMS Beyblades, please see the [[Heavy Metal System | HMS article ]].  
 
For more information on the components and assembly of HMS Beyblades, please see the [[Heavy Metal System | HMS article ]].  
  
−
==Bit Protector Molds==
 
−
Throughout the life of [[Heavy Metal System | HMS]], BPs were generally the same, however, as time went on [[Takara]] released newer Beyblades, with new Bit Protector molds. Takara produced three different molds during HMS’s production, they are as follows:
 
  
−
*'''1st:'''<br>
 
−
[[Gaia Dragoon MS]]<br>
 
−
[[Dragoon MS]]<br>
 
−
[[Dranzer MS]]<br>
 
−
[[Driger MS]]<br>
 
−
[[Draciel MS]]<br>
 
−
[[Einstein MS]]<br>
 
−
[[Wyvern DJ]]<br>
 
−
[[Dragoon MS UV]]<br>
 
−
[[Death Gargoyle MS]]<br>
 
−
[[Wolborg MS]]<br>
 
−
 
−
*'''2nd:'''<br>
 
−
[[Advance Averazer]]<br>
 
−
[[Advance Guardian]]<br>
 
−
[[Advance Striker]]<br>
 
−
[[Advance Eterner]]<br>
 
−
[[Phantom Fox MS]]<br>
 
−
[[Dark Leopard MS]]<br>
 
−
[[Magical Ape MS]]<br>
 
−
[[Round Shell MS]]<br>
 
−
[[Samurai Changer MS]]<br>
 
−
[[Thunder Dragon]]<br>
 
−
[[Sea Dragon]]<br>
 
−
[[Dragoon MF]]<br>
 
−
[[Dranzer MF]]<br>
 
−
 
−
*'''3rd:'''<br>
 
−
[[Jiraiya MS]]<br>
 
−
[[Aero Knight MS]]<br>
 
−
[[Bloody Devil MS]]<br>
 
−
[[Shining God MS]]<br>
 
−
[[Slash Riger MS]]
 
−
 
−
''Note: While Takara produced all three different molds, [[Hasbro]] only made one.''
 
−
 
−
=== Differences Between Molds ===
 
−
The first mold, produced in most of the original HMS releases, is loose; this results in an unstable Beyblade with lowered spin velocity. The second mold, is tighter than the first and was the most produced of the three molds. The third mold, only produced in four Beyblades is the most stable and tightest, with very little room between the BP and AR.
 
−
 
−
===Mold Uses===
 
−
Generally, using the tightest BP is the best choice. It makes the parts fit more snugly, not allowing them to rattle during battle. The first mold can be used for [[Wobbler | wobbler]] combinations, as the looseness contributes to the wobbling, but what it loses from this (stability and spin velocity) are far most costly in a battle situation.
 
  
 
==Overall==
 
==Overall==
 
Having all three different Bit Protector molds is essential for any serious Beyblade player; the difference they give may seem miniscule, but thats what it comes down to in serious matches.
 
Having all three different Bit Protector molds is essential for any serious Beyblade player; the difference they give may seem miniscule, but thats what it comes down to in serious matches.

Revision as of 22:36, 11 May 2008

Overview

The Heavy Metal System introduced many new concepts compared to the first generation of Beyblades, one of them being the Bit Protector. As explained in the HMS article, the Bit Protector (BP) plays a much larger role in the assembly of a Beyblade than the Bit Chip did on plastic Beyblades. It is the “screw” that holds together the Beyblade, and what the dual shooter latches onto when preparing to launch.

For more information on the components and assembly of HMS Beyblades, please see the HMS article .


Overall

Having all three different Bit Protector molds is essential for any serious Beyblade player; the difference they give may seem miniscule, but thats what it comes down to in serious matches.

Retrieved from "http://wiki.worldbeyblade.org/index.php?title=Bit_Protector&oldid=604"